Skip to content
My Locksmith

Car keys & lockouts

Automotive locksmith in Peoria, AZ

Our vans carry the key cutting machines, transponder programmers and diagnostic tools the job actually needs, so the work happens where your car is parked. No tow, no dealership appointment, no waiting three days for a key to ship.

Questions

Automotive questions we get asked

Will you break my window?

No. Breaking glass is a last resort reserved for a genuine emergency such as a child or animal locked in heat, and even then only with your explicit go-ahead or emergency services on scene. Normal lockouts are opened with wedges and reach tools.

Can you make a key with no original to copy?

Yes. That is the job. We read the vehicle's key code or decode a lock directly, cut a fresh blade to spec, then pair the chip to the immobiliser through the diagnostic port.

I bought a fob online — can you program it?

Often yes, and we are happy to try. Be aware that cheap fobs sometimes ship on the wrong frequency or with a chip that will not take a session. If yours will not pair, we will show you why and you can decide whether to use one of ours.

The hardware store cut me a key and it will not start the car. Why?

They cut the metal but did not program the chip — most of them cannot. The blade will turn the lock, the immobiliser will refuse to release fuel or spark. Bring that key out and we can often program it rather than cutting a new one.

My car says 'no key detected' but the fob is right there.

Usually a dead fob battery. Every push-to-start vehicle has a backup: a specific spot to hold the fob against — the steering column, the console tray, or the start button itself — that reads the chip without radio. We can show you where yours is.

My key will not turn at all. Is the ignition broken?

Not necessarily. Try turning the steering wheel firmly left and right while gently turning the key — a steering lock under tension binds the cylinder and mimics a failure. If that frees it, your ignition is fine and the problem was load, not wear.

Can I pull it out myself with pliers or glue?

Please do not. Pliers need a protruding stub to grip and usually push the blade deeper when there is not one, and superglue bonds the fragment to the wafers — that turns a short extraction into a full cylinder replacement.

How much cheaper is this than replacing a lost key?

Meaningfully — often half or less. With a working key in hand we skip the decoding and the all-keys-lost immobiliser procedure, which is where most of the labour in a lost-key job sits.

Locked out, or just planning ahead?

Call and you get a real person, a real arrival window, and a price before anyone touches a lock.

Mon–Fri 7am–6pm · evenings & weekends by appointment

Call nowText

Automotive