Skip to content
My Locksmith

Commercial

Panic Bar & Exit Device Installation

Code-compliant exits that lock from outside and always open from inside.

Panic hardware is a legal requirement on many commercial exits, and it is the one piece of door hardware that can shut you down at inspection. The rule behind it is simple: a single motion, no key, no twist, no thought — the door opens.

We install and repair exit devices that pass inspection and survive daily use. We will also tell you plainly when a door does not need panic hardware, because fitting it where it is not required is a common and expensive mistake.

What the visit includes

  • Rim, mortise, surface and concealed vertical rod devices
  • Code-compliant single-motion egress
  • Exterior trim so the door locks from outside but always opens from inside
  • Alarmed and delayed-egress options where permitted
  • Repair and realignment of sagging or binding existing devices
  • Door closers adjusted to latch properly every time

You probably need this if…

  • An inspection flagged your exit hardware
  • The crash bar sticks, rattles or fails to latch
  • An exit is chained, blocked or propped — a serious violation
  • You are fitting out a new commercial space

Questions

Panic Bar & Exit Device Installation FAQs

Can I lock a fire exit from the inside after hours?

No. Any device requiring a key, a twist or a second motion to get out is a violation and a genuine danger. Where security is the concern, alarmed or delayed-egress hardware is the legal way to solve it, and we can fit it.

Our panic bar does not latch properly. Repair or replace?

Often repair. Most non-latching devices are misaligned, have a worn strike, or sit on a door whose closer is out of adjustment. We diagnose before quoting a replacement.

Need panic bar & exit device installation?

Call 623-207-8796 and you get a price before anyone touches a lock.

Mon–Fri 7am–6pm · evenings & weekends by appointment

Call nowText

Panic bar installation